e*thirteen LG1 Race Carbon Crank Gen4 - 170mm x 83mm
Gen4 carbon downhill crank arms with a 30mm spindle and P3 Connect interface, supplied without bottom bracket or chainring.
Compared with earlier cranks, the Gen4 design has a reduced Q factor, slimmer overall profile and lower volume. The spindle sits on the non-drive side, which makes chainguide setup and drivetrain maintenance easier.
Key Features
- Crank length: 170mm
- Spindle width: 83mm
- Weight: 452g
- World Cup DH-rated layup in compacted carbon fibre, with extra 3k carbon on the front and rear faces for impact resistance
- 30mm spindle diameter, P3 Connect interface
- Adjustable chainline for Non-Boost, Boost and Super Boost frames
- Spindle on the non-drive side
- Built-in 8mm self-extractor
- Finish: Stealth Black with protective vinyl
Compatibility
- Frames with 83mm BB shell
- Use the SL chainring (-8mm offset) for Non-Boost and Boost chainline
- Use the UL chainring (-5mm offset) for Super Boost chainline
In the Box
- Crankset
- APS adjuster
- Installation tools
- 2 x crank boots
- Sticker
- User manual
- Bottom bracket and chainring are not included
You Will Also Need
- Bottom bracket to suit the frame
- SL or UL chainring to suit the chainline
Good to Know
- Match the crank spindle width (73mm or 83mm) to your bottom bracket shell before ordering.
