Our direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet. They are available in 3 different offsets: standard 6mm offset, Boost 3mm offset, and BB30 short spindle/Superboost 0mm offset. This 6mm offset chainring suits “standard” non-Boost drivelines – see below.

These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets, including DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle.

CHOOSE YOUR OFFSET

Standard Road/CX/Gravel: 6mm offset for cyclocross and road crank applications with 47mm chainline

Standard MTB: 6mm offset for non-Boost mountain bikes, GXP and long spindle BB30 cranks for 49mm chainline

Boost: 3mm offset for 52mm chainline

BB30: 0mm offset for BB30 short spindle cranks for 49mm chainline

Fat bikes: If your fat bike has a 170/177 rear hub spacing, use the standard 6mm offset

Praxis Works Road/CX cranks use the 6mm offset. Praxis Works mountain cranks use the 3mm offset for their DM-A and 0mm offset for their DM-B chainrings.

DROP-STOP TECHNOLOGY

Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile delivers ultimate chain retention and mud shedding ability.

RECOMMENDATIONS

We recommend the use of a clutch style rear derailleur for the best chain security.

We recommend using a T25 L-Wrench or similar for removal and installation of the bolts. An L-wrench works best, since the crank spindle may contact a socket adapter and prevent it from engaging properly.

Use the same 3 bolts to attach the Wolf Tooth ring or we carry replacement bolts

For a longer lasting and more durable option, check out the CAMO System that offers stainless steel chainrings.

SPECIFICATIONS

Weights: 26t • 52g | 28t • 59g | 30t • 65g | 32t • 70g | 34t • 75g | 36t • 81g | 38t • 90g | 40t • 106g | 42t • 111g

Material: 7075-T6 aluminum

Made in the USA

The Story

Wolf Tooth was founded to design and manufacture precision cycling products that emphasize function, performance, and reliability to meet the needs of our fellow racers and riders.

We are a group of cyclists in Minneapolis, Minnesota that spend a lot of time talking about bike components. Like most detail-obsessed riders, we’re always looking for new products that could make our bikes lighter, faster, more versatile, or more reliable. We pride ourselves on delivering premium products of the highest quality.

description	DM Chainring for SRAM GXP Cranks, Not Bash Ring Compatiable – 28T, DM Chainring for SRAM GXP Cranks, Not Bash Ring Compatiable – 30T, DM Chainring for SRAM GXP Cranks, Not Bash Ring Compatiable – 32T, DM Chainring for SRAM GXP Cranks, Not Bash Ring Compatiable – 34T, DM Chainring for SRAM GXP Cranks, Not Bash Ring Compatiable – 36T